Update Router Information

To update Router information, follow the steps below:

Step 1: In the menu bar, select Integration > Event Gateway.

Step 2: In the Event Gateway list, select an Event Gateway > select the Router tab.

Step 3: In the Router list, click the Edit button.

Step 4: Modify the following information:

• Name (required): Router name.
  • May contain a–z, A–Z, hyphens (-), underscores (_), and digits; must start with a letter; maximum 30 characters.
• Mode (required): Router type. Select from:
  • Oneway
  • Sync
  • Async
  • The interface displays 3 default router templates corresponding to the 3 modes.
• Authentication (required): Whether the Router uses authentication.
  • Default: None.
  • Select from:
    • None: no authentication.
    • JWT auth (if JWT auth configuration is enabled).
• Path (required): Path for sending (POST) or retrieving (FETCH) data.
  • Must start with /; may contain a–z, A–Z, 0–9, hyphen (-), underscore (_), /, {, }, =; maximum 100 characters.
• Scope (required): Defines the value of the "scope" claim in the JWT token for API request authentication.
  • Maximum 50 characters.
• Topic (required): Kafka topic name that receives data in Oneway mode.
• Request topic (required): Kafka topic name that receives data in Sync or Async mode.
  • May contain a–z, A–Z, 0–9, hyphen (-), underscore (_), dot (.).
  • Must start with a letter; maximum 249 characters.
• Response topic (required): Kafka topic name that retrieves data in Sync or Async mode.
  • May contain a–z, A–Z, 0–9, hyphen (-), underscore (_), dot (.).
  • Must start with a letter; maximum 249 characters.

Click Add router to add a router template for each Router Mode type. Click Remove router to delete a Router.

Step 5: Click Save to save the new configuration.